BQ25898: About register reset time by REG_RST

Tsukui Yusuke

Guru 21930 points

Part Number: BQ25898

Hi,

Customer want to use the reset function using REG_RST register.
Could you tell me the time from setting REG_RST to 1 until the reset is completed?
They need that information for software design.

Best regards
Yusuke

over 4 years ago

0 Ning T over 4 years ago

TI__Guru 57721 points

Yusuke,

It should be pretty quick.

Thanks,

Ning.

0 Tsukui Yusuke over 4 years ago in reply to Ning T

Guru 21930 points

Hi Ning,

Thank you for your response.
Could you give me information about the time regulation for resetting such as design target specifications?
They want to know the estimated time.

Best regards
Yusuke

+1 Ning T over 4 years ago in reply to Tsukui Yusuke

TI__Guru 57721 points

Yusuke,

The spec is not available. The bit is reset to 0 after register reset is completed. The customer may monitor the bit status.

Thanks,

Ning.

Power management

Power management forum

BQ25898: About register reset time by REG_RST