TPS62860: How to connect SDA/SCL if we don't use I2C

Sherry Liang

Genius 10255 points

Part Number: TPS62860

Dear team,

Could you please tell me how to connect SDA/SCL pin if we don't use I2C?

Thanks & Best Regards,

Sherry

0 Febin over 4 years ago

Hi Sherry,

If you do not need an I2C, I would propose to have a look at our TPS6280x FAMILY.

Here is the datasheet:

Please let me know if I can help further.

Regards,

Febin

0 Sherry Liang over 4 years ago in reply to Febin

Hi Febin,

The customer uses this device just because this device has stock....

Can they connect SDA/SCL to GND?

Thanks & Best Regards,

Sherry

0 Febin over 4 years ago in reply to Sherry Liang

Hi Sherry,

Okay understood!

So, if you are not using the I2C then please connect the SDA/SCL to GND/AGND.

If you don't have further questions, I will go ahead and close this thread. Please hit Resolved if you agree.

Regards,

Febin

Power management forum