• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 287 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ25713B: BQ25713 .battery is full

BQ25713B: BQ25713,setting resistor before charging

smrutirekha puspasree
Prodigy 170 points

Part Number: BQ25713B
Other Parts Discussed in Thread: BQ25713

Hi team,

what are the basic resistors,we need to program before cahrging a battery?

Thanks,

smruti

  • 0
    TI__Genius 11385 points

    Hi Smruti,

    Please refer to the datasheet and the EVM for this information. There are a lot of resistors needed to get the IC into a working design. BQ25713 is not a standalone charging IC, it needs host I2C at all times.

    Thanks,

    Peng

    *Please press "This Resolved My Issue" on the thread if my answer is satisfactory