• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 436 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH-POWER-DESIGNER: Flyback support for LM5156 and LM51561

Dice-K
Mastermind 7460 points
Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: LM5156, LM51561, LM5156-Q1, LM51561-Q1

Hi support team,

LM5156 and LM51561 do not support WEBENCH Flyback.
Do you have any plans to support it in the future?

I substitute LM5156-Q1 and LM51561-Q1 with WEBENCH until they are available.

Regards,
Dice-K

  • +1
    TI__Guru 58361 points

    Hello Dice,

    thank you for using the Webench tool.

    This has just been added and is in the release process - so with the next update of Webench this should be Devices and topologies will be available as well.

    In the meantime please continue to select the Q1 version.

    Best regards,

     Stefan