TPS536C7: Programming issue

Hi Eric,

What if you modify the config. code with B1 version directly without importing .xml file? Is it still not working?

Hi Derrick,

Importing xml file is purpose for after SMT I can programming if factory can't pre-burn.

So I want to make sure no error occur in process.

BR

Eric

Hi Eric,

I know but I'm not sure if the error is caused by different version. That's why I ask you try to modify directly and export .xml file(B1).

Because I don't have the sample to try for you in hand.

Hi Derrick,

Here is my step：

1. I use A1 xml import to B1 chip

2. Modify parameter

3. Export B1 xml

4. Import B1 xml to B1 chip

Then I can see error occur in process, but seems like DUT is working normal.

Hi Eric,

What I mean is skip step 1 and modify parameters directly. But seems it works now?

Hi Derrick,

Due to I'm not this xml original owner, so I'm not sure what parameters need to be setting.

In step 2 is means "try to give them a wrong value then programming make sure chip can be program"

Hi Eric,

I feel kind of confused. Is it programmable for B1 chip without importing A1 .xml?

If yes, you can refer the content of A1 .xml to modify the B1 chip without importing A1 .xml by importing first then remember each parameter you need to modify then change B1 chip directly.

Hi Derrick,

In other words, can I import A0 xml file to B1 chip directly? (A1 was typo)

if yes, in my opinion it should be no error occur when programming, right?

Hi Eric,

Yes, you are right. Basically, you can import A0 .xml into B1 directly. But I would like to confirm if modifying B1 chip is workable. Because we don't encounter this situation before.