LM4040：Power management forum

SUNNY MA

Prodigy 10 points

Part Number: LM4040

Lm4040biz-2.5/nopb incoming materials are oxidized, and the year exceeds 5 years. Please arrange to return them

over 3 years ago

0 Ben C over 3 years ago

TI__Guru 56345 points

Hi Sunny,

Can you make the pictures bigger? It is difficult to see the issue you are describing.

Ben

0 Ben C over 3 years ago in reply to Ben C

TI__Guru 56345 points

Hi Sunny,

To answer your other question regarding the return procedure, please follow the guidance in ti.com for Customer Returns.

Ben

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

没有了，只拍了这一张图片

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

联系过客服，你们回复确定退货，我把记录剪给客服处理

0 Ben C over 3 years ago in reply to SUNNY MA

TI__Guru 56345 points

Hi Sunny,

I apologize but I do not know Chinese. Can you translate to English? Thank you!

Ben

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

I contacted the customer service before. You replied that you can return the goods. I'll cut the record to the customer service for processing

0 Ben C over 3 years ago in reply to SUNNY MA

TI__Guru 56345 points

Hi Sunny,

Thanks for the update. At this point is there anything you need answering?

Ben

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

请评估物料我要申请退货

Please evaluate the materials. I want to apply for return. The customer return operation you proposed will be tested by me

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

请评估物料我要申请退货

Please evaluate the materials. I want to apply for return. The customer return operation you proposed will be tested by me

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

Please evaluate the material. I want to apply for return

0 Ben C over 3 years ago in reply to SUNNY MA

TI__Guru 56345 points

Hi Sunny,

I do not evaluate the material. That is done through customer service.

Ben

0 Ben C over 3 years ago in reply to Ben C

TI__Guru 56345 points

Hi Sunny,

Can you close the thread by clicking on "resolved"? Please work directly with customer service.

Ben

0 SUNNY MA over 3 years ago in reply to Ben C

Prodigy 10 points

Please the professional appraisal of the engineer

0 Ben C over 3 years ago in reply to SUNNY MA

TI__Guru 56345 points

Hi Sunny,

I do not work in customer return group.

Ben

0 Ben C over 3 years ago in reply to Ben C

TI__Guru 56345 points

Hi Sunny,

Please close the thread by clicking on "resolved". Thanks!

Ben

0 Ben C over 3 years ago in reply to Ben C

TI__Guru 56345 points

Hi Sunny,

If there are no further questions, can you please close the thread by clicking on "resolved"? Thanks!

Ben