TPS92513: No current rating description in the EC table

Hi Team

Could someone please support this case?

Is it safe to let the customer know that the current rating of the TPS92513 is 1.5A?

Regards

David

Hi Robin

Thanks for the response.

Could you check if 2.7A would work for TPS92513? I think this case is more of a R&D and the customer might just want a confirmation that the datasheet is correct.

The end equipment is an eye care equipment and I'm guess the power would be 18V or 12V, not sure about the output voltage as the customer didn't provide me with such info.

Regards

David

Hi Robin

Just received a confirmation from the customer.

The input voltage is 24V and the output voltage is 0.8V, with 2.7A.

Could you check if this setup is ok for TPS92513?

Looking forward to your response.

Regards

David

Hi Robin

Thanks for the response! This should be enough for the customer's evaluation.

One more question though, what would the maximum current be for this application?(24V-0.8V)

Considering that the Vout is quite small I'm assuming that the device should be safe with current no more than 6A, is this understanding correct?

Regards

David

Hi Robin

What would the maximum current be for this application?(24V-0.8V)

Could you look a bit into it?

Regards

David