Hi
Short question, Can the BMS exit from Emergency Shutdown mode by applying a voltage to VAC terminal?
Thanks
- Hendra
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
Short question, Can the BMS exit from Emergency Shutdown mode by applying a voltage to VAC terminal?
Thanks
- Hendra
Hello Hendra,
The only ways to exit the EMSHUT should be in the TRM:
To wake the device from normal shutdown you can apply a voltage on the VACP pin higher than Charger Present Threshold.
Sincerely,
Wyatt Keller