WEBENCH is unable to open a TPS7A8300 design based on the following parameters:
Vin = 4.75V min, 5.25V max
Vout = 1.8V
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
WEBENCH is unable to open a TPS7A8300 design based on the following parameters:
Vin = 4.75V min, 5.25V max
Vout = 1.8V
Hi Kerry,
Did you leave the current at 2A? It would not work when I left it at 2A but I reduced it to 0.1A and it ran. I'm guessing it has thermal metrics built into it because 5V to 1.8V at 2A is over 6W.
Regards,
Nick