• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 225 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

pspice for ti

ABHISHEK KUMAR
Prodigy 120 points
Other Parts Discussed in Thread: LM5023

Hii Everyone,

I am facing a problem while using PSpice for ti, whenever I try to open any simulation file only the "start page (inserted below)" is opening, not the simulation or schematic page. Only the page

Please Help!!

Thanks and Regards

Abhishek

  • +1
    TI__Expert 5880 points

    Hi Abhishek,

    Please double click on "PAGE1" to open the schematic. You can also right-click on the tab title, "LM5023_TRANS.opj" and selected "Tabbed Document" in order to view the hierarchy and the schematic side-by-side.

    Thank you,

    Jackie