This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90120A: how to configure current-monitor setting

Part Number: UCD90120A
Other Parts Discussed in Thread: INA196

In our latest design, we use MON2 to sense current from INA196. I break the link between INA196 and MON2, and measure the voltage of the INA196 output and MON2. But there's abnormal pulse on MON2 when I congiure MON2 as current-monitoring. Please check below picture. So is there any other setting when I configure MON2 as current-monitoring? If not, please help to analysis the abnormal pulse. Thanks.