TPS568215: slew rate to 0.5msec

RAMESH VANKUNAVATH

Part Number: TPS568215
Other Parts Discussed in Thread: TPS543820

in our design we are using TPS568215 part, default slew rate of this part in design is 1msec, based on requirement plan to change it to 0.5msec slew rate, please can you help on same thing.

over 2 years ago

0 Yuchang Zhang over 2 years ago

TI__Mastermind 18510 points

Hi I suppose you would like to change soft start to 0.5ms, but that can't be implemented since the min value is the default 1ms.

Yuchang

0 RAMESH VANKUNAVATH over 2 years ago in reply to Yuchang Zhang

Prodigy 10 points

in datasheet, this information is not there..

0 RAMESH VANKUNAVATH over 2 years ago in reply to RAMESH VANKUNAVATH

Prodigy 10 points

is there any part with ~0.5msec slew rate and pin compatibility with TPS568215 ?

0 Miranda Gu over 2 years ago in reply to RAMESH VANKUNAVATH

TI__Genius 15337 points

Hi Ramesh,

Sorry there's no suitable part. You may look at TPS543820, but not p2p with TPS568215.

0 Yuchang Zhang over 2 years ago in reply to Miranda Gu

TI__Mastermind 18510 points

Hi Ramesh,

I found Gerold also recommended parts with smaller SS by Email as well, if more questions, we can discuss there.

Yuchang

Power management

Power management forum

TPS568215: slew rate to 0.5msec