Wireless Development Transmitter/Receiver development kit

Francisco Zamudio

Other Parts Discussed in Thread: BQ51013B, BQ500212A

Hello Team,

I am looking for some options to start with wireless charging development, but I would like to get from your expert recommendations. I've seen that you have some devices like BQ51013B, BQ500212A, but I seen that some of those are not recommended for new designs.

Could you please recommend some development kits for transmitter and receiver?

Some inputs for you is that we are planning to design a mat and work with about 30 W. For the receivers would be like 5W or 10 W.

I would appreciate your support.

Regards

Francisco

over 2 years ago

0 Bill Johns over 2 years ago

TI__Guru 69681 points

Hello Francisco

We have a limited number of wireless power devices, they are in the 5W range. The BQ51013B and BQ500212A would be the best to start with.

Cannot support 30W mat.

I will contact you.

0 Francisco Zamudio over 2 years ago in reply to Bill Johns

Prodigy 40 points

Hello Bill,

Thanks for your answer.

I was wondering why the BQ500212A is not recommended for new designs? Do you have more options? Do you have some EVM for transmitter and receiver?

Sure, we can be in touch!!

Thanks!

Francisco

0 Bill Johns over 2 years ago in reply to Francisco Zamudio

TI__Guru 69681 points

We can work this off line -- I have sent you a msg.

Power management

Power management forum

Wireless Development Transmitter/Receiver development kit