• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 322 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM74720-Q1: Difference between two circuit

Amelie Zheng
Genius 10865 points
Part Number: LM74720-Q1
Other Parts Discussed in Thread: LM74722-Q1, LM74721-Q1,

Hi Team,

What is the difference between two circuit? It seems even only have Q1 customer still could achieve load protection. why need to add Q2？

what is the difference of 720/721/722?

  • 0
    TI__Guru 57737 points

    Hi Amelie,

    There is a difference in the orientation of Q1 and Q2 FETs. The body diodes are not in the same direction.

    Q1 FET is required for reverse current blocking , input reverse polarity protection

    Q2 FET is required for forward current  blocking in condition like Enable low, OVLO

    For understating the difference between LM74720-Q1, LM74721-Q1 and LM74722-Q1. You can consider LM74720-Q1 to be the base part

    1. LM74720-Q1 + VDS Clamp Functionality = LM74721-Q1  
      • LM74721-Q1 allows for TVS less operation in case of ISO Pulse 1
    2. LM74720-Q1 + faster Gate drive strength = LM74722-Q1
      • LM74722-Q1 is suitable for faster Gate turn ON conditions like Rectification of 200 kHz AC super imposed waveform