Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Thank you for your patience. I reviewed the schematic attached and I'm a little confused on what you are trying to do here. The device is normally used to drive a half bridge. Could you please provide more details? I'll go ahead and close this thread and send you an email so we can discuss this in more detail.
