BQ34Z100-G1: GPC Tool Error

Emre B

Part Number: BQ34Z100-G1

Hello, When I upload my log file, I'm getting error :

Warning: Discharge rate is too high. High rate reduces ID detection accuracy 10 hr rate is recomeended. Total discharge time is less than 5 hrs t_hrs= -4.19170138888889

Against to error, discharged and charged with C/20.

Here is my log file

/cfs-file/__key/communityserver-discussions-components-files/196/100ah_2D00_agm.zip

over 3 years ago

0 Emre B over 3 years ago

Prodigy 40 points

I tried again with deleting first lines of csv file. This time it gave 0 as result.

0 Emre B over 3 years ago in reply to Emre B

Prodigy 40 points

No it said

Warning: Discharge rate is too high. High rate reduces ID detection accuracy 10 hr rate is recomeended. Total discharge time is less than 5 hrs t_hrs= -4.19170138888889

as a result.

+1 Shirish over 3 years ago in reply to Emre B

TI__Guru 57697 points

Hello Emre,

The first column of elapsed time must be in seconds as per the documentation. I would recommend that you convert the first column to elapsed time in seconds and resubmit. Elapsed time can be set to 0 for the first row.

Power management

Power management forum

BQ34Z100-G1: GPC Tool Error