UCC28951: Need replacement of UCC28951PWR

Dania BATOOL

Part Number: UCC28951
Other Parts Discussed in Thread: PMP8740,

I am designing a high power battery charger. For this purpose I found some reference design (PMP8740) which uses UCC28951PWR. Can you recommend any alternative part number of it?

Thanks

over 3 years ago

0 Adam E2E over 3 years ago

TI__Intellectual 2430 points

Hi Dania,

UCC28951 is the latest PSFB controller , and battery charger needs wide range output , so LLC (UCC25640X) may not be suitable for it.

do you have any concern about UCC28951?

thanks.

0 Dania BATOOL over 3 years ago in reply to Adam E2E

Prodigy 85 points

But I cannot use the latest PSFB controller as it is out of stock on all suppliers. You are saying that there is no alternative for it?

0 Adam E2E over 3 years ago in reply to Dania BATOOL

TI__Intellectual 2430 points

you can check the PSFB controller as below list.

https://www.ti.com/power-management/acdc-isolated-dcdc-switching-regulators/pwm-controllers/products.html#p1129=Phase-Shifted%20Full-Bridge

Power management

Power management forum

UCC28951: Need replacement of UCC28951PWR