Hello Team,
I have a question regarding BQ25611D. Data Sheet is SLUSDF8B revised 9/2020.
9.5.12 Part Information Register (Address = 0Bh)
Describes bits 3-6 as the PN and should report ‘1010’ (representing BQ25611D)
I can read all the register just fine. I’ve dumped them, tweaked writeable bits, verified.
When I read register 0x0B, I always get back 0x04, which means the PN is ‘0000’. Doesn’t matter if single register read or the whole block (as shown below).
What did I miss?
Thanks!
Connor
