Other Parts Discussed in Thread: LM61430-Q1
Hi expert,
Can I enable the device first and then apply Vin? Is there any problem with this? Thanks a lot!
BR,
Elec Cheng
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi expert,
Can I enable the device first and then apply Vin? Is there any problem with this? Thanks a lot!
BR,
Elec Cheng
Hello Elec, per the ABSMAX table, unfortunately, EN cannot exceed VIN by 300mV.
So no.
LM61430-Q1 does not have this concern.
Hi Marshall,
I don't really understand below sentencet. Could you please explain a little more? Thanks a lot!
per the ABSMAX table, unfortunately, EN cannot exceed VIN by 300mV.
BR,
Elec Cheng
Hello Elec,
My understanding is you are describing a scenario where Vin maybe at a voltage potential (or floating), less than EN.
In ABSMAX table, EN max voltage potential is VIN + 300mV, thus, if the above scenario is true, you would be violating the ABSMAX table and device performance cannot be guaranteed.