Hi support team,
I understand that when the output is normal, the PowerGood pin goes High after a 100μs delay.
Is 100μs a typical value?
Or is it a Maximum value?
Regards,
Dice-K
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi support team,
I understand that when the output is normal, the PowerGood pin goes High after a 100μs delay.
Is 100μs a typical value?
Or is it a Maximum value?
Regards,
Dice-K
Hi Dice,
The 100 us is the typical delay time for PG to go high. Max value based on characterization data is 130 us.
Best regards,
Varun