PTH12050W: RC at track pin

KKF

Expert 4255 points

Part Number: PTH12050W

Hi,

To control the rising of the output voltage, is it okay to put an RC on the track pin?

Thanks a lot & BR,
KF

over 2 years ago

+1 Yitzhak Bolurian over 2 years ago

TI__Mastermind 18370 points

Hi KF,

As a matter of fact there is already a default RC circuit on the track pin, buy could increase the time constant.

Track pin becomes active 20 mS after the Vin rise to the proper level.
As long as the 20 mS is passed and Vin is over the under-voltage lockout level, track pin will do the job.

Regards,

Yitzhak Bolurian

0 Yitzhak Bolurian over 2 years ago in reply to Yitzhak Bolurian

TI__Mastermind 18370 points

Hi KF,

If the above addressed your question, please set the status of this post to resolved.

Regards,

Yitzhak Bolurian

Power management

Power management forum

PTH12050W: RC at track pin