• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 390 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50-R2: Full charge capacity and remaining capacity

Cherry Zhou
Mastermind 22235 points
Part Number: BQ40Z50-R2

Hi team,

Here's an issue from the customer may need your help:

Regarding the full charge capacity and the remaining capacity, the customer would like to know how the mAh automatically changes to mWh. Checking the configuration, it has no changes, an then returns to normal after reset.

Could you help check this case? Thanks.

Best Regards,

Cherry

  • 0
    TI__Guru 57697 points

    Hello Cherry,

    The setting shown is the initial setting. There is another BatteryMode() in Registers. The host or any other device can send the BatteryMode() command to change BatteryMode() register. Customer can write the original value of BatteryMode() to the regiter to get it to report in mAH.