[FAQ] BQ76952: Where can I find additional training videos for the BQ769x2 battery monitor family?

Here is the link to the video training series for the BQ769x2 battery monitor family below along with descriptions for each of the videos.

https://www.ti.com/video/series/battery-management-deep-dive-on-demand-technical-training.html 

• Introduction to the BQ76942 / BQ76952: High level overview of the first two devices in the family, the BQ76942 and BQ76952.
• BQ76942 / BQ76952 Device Overview: An overview of the major features of the device.
• Evaluation module and Battery Management Studio: This video shows how to set up the EVM and how to configure the device using BQStudio.
• FET Configurations and Cell Balancing: This video discusses the options for FET configuration and for cell balancing. Multiple application documents are also available in the ti.com product folders that discuss these topics in greater detail.
• Microcontroller programming for the BQ769x2 Monitor Family: This video walks through a basic configuration of the device, first showing how to configure the registers using BQStudio, then showing how to take those settings and apply them to the microcontroller code examples that are available. (code examples link: https://www.ti.com/lit/zip/sluc701)
• Creating the Schematic for BQ769x2 Battery Monitors: This video walks through the schematic creation process to help answer common questions and prevent the most common mistakes.

Link to BQ769x2 FAQ homepage