WEBENCH-POWER-DESIGNER: netlist export possible?

Hans

Part Number: WEBENCH-POWER-DESIGNER
Other Parts Discussed in Thread: LM5160

Hello Team,

is it possible to export the schematics as a netlist from Webench? This would be a great help as it could be imported into other simulation programs like pSPICE for TI.

Thanks and Best Regards.

Hans

over 3 years ago

0 Shaheen Makandar over 3 years ago

TI__Expert 3110 points

Hi Hans,

Thanks for above query.

Unfortunately, This feature is not available on WEBENCH, However we have Schematic export feature for PSPICE, Eagle, Altium as shown in the below example.

Regards,

Shaheen S M

0 Hans over 3 years ago in reply to Shaheen Makandar

TI__Genius 12865 points

Hi Shaheen,

thanks! Unfortunately this feature is not available for all our parts (e.g. LM5160).

Best Regards,

Hans

Power management

Power management forum

WEBENCH-POWER-DESIGNER: netlist export possible?