This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63000: Power save mode

Part Number: TPS63000
Other Parts Discussed in Thread: TPS63001, TPS63002

Hi,

We have a design using TPS63000 with light load. We want to use the power save mode to gain the efficiency as we are using battery as input source. However, we didn't see any improvement after enabling the power save mode. Is there a way to check whether it gets enable correctly? We measured the same current consumption with and without power save mode enable. 

Schematic attached.