• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ51051B: Where to find the bQTesla transmitter referenced in design guide.

Daniel Mesiti
Prodigy 30 points
Part Number: BQ51051B

The Design guide for the BQ51051B linked to from product page https://www.ti.com/lit/ug/sluua25c/sluua25c.pdf (Page 7) mentions using a specific Transmitter for testing.

The "bqTesla" Transmitter in the guide does list an EVM (bq5100210EVM-HPA689) but it has been discontinued.

It is my understanding that this Transmitter is also required to get data for the FOD calibration software provided.

I'm just trying to figure out where or what to purchase / assemble to use the FOD tuning software for this IC.

  • 0
    TI__Guru 68596 points

    Hello

    All the TI wireless power transmitters are NRND and EVMs discontinued.  

    For test and evaluation an Qi certified transmitter will work.

    For FOD tuning will required different equipment depending on the plans for your product.  What can you tell me about your application?  can you send a schematic for review?