TPS63001: Inductor Selection

jvasanthan

Part Number: TPS63001

Hi Team,

Can I use DFE252012P-2R2M=P2 inductor for TPS63001DRCR design? Please confirm.

regards,

James

+1 Zack Liu over 2 years ago

Hi James,

The selected inductor DFE252012P-2R2M=P2 works for this design. Thank you.

0 jvasanthan over 2 years ago in reply to Zack Liu

Hi Zack,

does this inductor works for both buck (1.2A) and boost(0.8A)?

Conditions: Vin - 3.0V to 4.2V, Vout - 3.3V

+1 Zack Liu over 2 years ago in reply to jvasanthan

Hi James,

Yes, this inductor saturation current spec is 3A, which is enough for both buck and boost mode.

0 jvasanthan over 2 years ago in reply to Zack Liu

Thank you Zack

Power management forum