• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 186 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ76930: how to read exactly value of single cell and how address auto- increment works

Marvn Arcangel
Genius 12535 points
Part Number: BQ76930

Hi Experts,

Our customer would like to know how to how to read the value of single cell using this product in combination with PIC16f690 MCU.

In addition, the datasheet mentioned an "address auto- increment" can you also share references on how to implement this?

Thanks for the support.

Regards,

Marvin

  • 0
    TI__Genius 11315 points

    Hey Marvin,

    Please refer the customer to the bottom of the product page where they can download some I2C sample code to analyze. There is also a commands subsection in the datasheet that specifies the command for reading from the cell voltage registers. Also, as far is address auto-increment, that is a I2C specific setup, they can probably find good example codes on GITHUB.

    Thanks,
    Caleb