Hai,
I am using this part in my new design,
Would Like to know consequences if we use different Voltage source for Input to regulator & Mosfet driving
Thanks & Regards
Jyothi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hai,
I am using this part in my new design,
Would Like to know consequences if we use different Voltage source for Input to regulator & Mosfet driving
Thanks & Regards
Jyothi
Hello Jyothi,
It should not be an issue as long as the Vin is within the recommended range of 4.5V to 28V and the inductor is adjusted according to the new max VIN as in equation 3 in the datasheet
thanks!
Tahar