GPCCHEM: GPC Report has '0' value

markand

Hi,

I am trying to get Chem ID from GPC tool, so for that I have uploaded required .zip file, however in GPC report, I am receiving the value as 0.

Please find the attached .zip and report file which I have uploaded in GPC tool.

Thanks

6153.roomtemp_rel_dis_rel-report.zip

0842.roomtemp_rel_dis_rel.zip

over 3 years ago

0 LeonardEllis over 3 years ago

TI__Guru 71526 points

Muhammed,

What is the PART NUMBER of the device?

Thank you,

~Leonard

0 markand over 3 years ago in reply to LeonardEllis

Prodigy 65 points

part number isGPCCHEM

0 Shirish over 3 years ago in reply to markand

TI__Guru 57697 points

Hello Muhammed,

If using single cell voltage values make sure to set

NumCellSeries=1

0 markand over 3 years ago in reply to Shirish

Prodigy 65 points

Hello Shirish,

As you say now. you can view files.

Thanks.

0 Shirish over 3 years ago in reply to markand

TI__Guru 57697 points

Hello Muhammed,

Sorry, i am not sure i understood that comment. Please mark this thread as resolved if you got a good report.

0 markand over 3 years ago in reply to Shirish

Prodigy 65 points

Hello Shirish,

No. my problem is not solved. I had already loaded as Numcellseries=1 in my files. You can download and review the files above.

+1 Shirish over 3 years ago in reply to markand

TI__Guru 57697 points

Hello Muhammed,

Yes, i see it is set correctly. Not sure why it showed me 4 when i saw it earlier.

I noticed a problem with the voltage column. The voltage column must contain whole numbers when specified in mV. Round ti to to a whole number and resubmit. Hopefully that is the only issue.

0 markand over 3 years ago in reply to Shirish

Prodigy 65 points

Thank you Shirish,

My problem is solved. I am grateful.

Power management

Power management forum

GPCCHEM: GPC Report has '0' value