The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25970: BQ25970 standalone mode doesn't work

Part Number: BQ25970

Hi, as caption,through battery manangement studio,the device couldn't read battery's voltage, also when I enable ADC,the original settings of Battery OVP automatically changed from 4.2V to 3.5V,could you pls let me know which pins would impact the chip to read battery voltage and automatically change the setting of OVP?

Thx!

Peter