Hi Team,
Could you please review the attached design using LP2998MA/NOPB.
Please let me know your comments.
Thank you.
Regards,
Marvin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Could you please review the attached design using LP2998MA/NOPB.
Please let me know your comments.
Thank you.
Regards,
Marvin
Hello,
The circuit is configured for minimum recommended VDDQ. I suggest to add a 100uF to the VTT output. This important for load transient. In layout the decoupling capacitor should be as close as possible to the device pins.
Regards