• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 184 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ]: Can LM5050-1, LM74700-Q1 or TPS241x controllers drive two back-back MOSFETs

TPS2410: Comparation between TPS2410 and TPS2412

Darren Wen
Prodigy 250 points
Part Number: TPS2410
Other Parts Discussed in Thread: TPS2412

Hi team,

Can you help to provide the detail comparation list about TPS2410 and TPS2412? And what is the different need to pay attention in application?

I only find the roughly comparation in datasheet, we need more detail information to help RD design. Thank you.

  • +1
    TI__Expert 3370 points

    Hi,

    TPS2410 has fault monitoring and status features which can signal to a downstream controller when the ID detects a reverse current scenario. TPS2412 on the other hand does not include these features and can be used when such signalling is not required. 

    Other than this, all the electrical characteristics pertaining to reverse current protection are the same for both the devices. Is there any specific parameter of concern about which further information is required?