• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 280 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54325: Max and min range of VFB falling(fault)

Hung Ching Hsu
Expert 3086 points
Part Number: TPS54325

Hi Team, 

My customer wants to know Max and min range of VFB falling(fault), datasheet only have typ. value at 85%. 

Do we have this data? Thanks.

Regards,

Jo

  • 0
    TI__Mastermind 26780 points

    Hi Jo,

    Nope unfortunately this data is not specified in the datasheet nor in the char results. Just the typical value is specified. If there is a 5% hysteresis (based on typ falling vs rising), then an estimated range could be from 80%/85%/90%. Again, this is not characterized but an estimate only.

    Thanks,
    Amod