Hello,
My customer has a question about mixing TPS543C20 and TPS543C20A.
When assembling a TPS543C20 on a board designed with TPS543C20A and tis BOM, or vice versa, other than the VIN difference, what should I pay attention to?
Thank you.
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer has a question about mixing TPS543C20 and TPS543C20A.
When assembling a TPS543C20 on a board designed with TPS543C20A and tis BOM, or vice versa, other than the VIN difference, what should I pay attention to?
Thank you.
JH
Hi JH,
Sorry for the delayed reply. Due to US holiday, our US expert will reply you tomorrow at the earliest.
As long as the application is within the VIN range of both devices, then their BOMs can be interchangeable. Please refer to the datasheet and calculator tool when designing the BOM.
Best regards,
Britton