• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 107 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS659037: Need to write TPS6590378ZWS to OTP

Conor
Mastermind 9640 points
Part Number: TPS659037
Other Parts Discussed in Thread: AM5718,

Hi,

We are planning to use AM5718 as shown in Fig.1, but we think that all sequences can be specified by the pin settings of BOOT0 and 1 at the initial startup.

Is it okay to recognize that there is no additional work to write to OTP?

TPS659037 User's Guide to Power AM574x, AM572x, and AM571x - Figure 1. Processor Connection With TPS6590378ZWSR

https://www.ti.com/lit/ug/sliu011f/sliu011f.pdf 

Thanks,

Astro

  • 0
    TI__Genius 12735 points

    HI Astro,

    The TPS659037 family of devices is not user programmable so the devices are programmed from the factory and will not require that you configure the OTP. You will need to decide if your system will required BOOT=0 or BOOT=1. The differences in these settings can be found in Table 5 of the user guide you linked to above.

    Best regards,

    Layne J