TPS43000 thermal spec

Angela

Intellectual 595 points

Other Parts Discussed in Thread: TPS43000

Are Ψjx or/and θjx available for TPS43000?

over 14 years ago

0 Chris Glaser over 14 years ago

TI__Guru**** 150930 points

I believe this post answers your question: http://e2e.ti.com/support/power_management/non-isolated_dcdc/f/196/p/83613/288522.aspx#288522

You can get your local TI sales person to enter this request into the internal site.

0 Angela over 14 years ago in reply to Chris Glaser

Intellectual 595 points

Chris,

The two links on that post are bad links.

Can you send me the info?

Thanks,
Angela

0 Chris Glaser over 14 years ago in reply to Angela

TI__Guru**** 150930 points

Angela,

In the first link, they revised that app note again earlier this year. So, it is Rev G now: http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slma002g

The second app note is here: http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slma004b

TI can provide the requested thermal numbers, but it requires a TI employee to access the last link on that page and enter the required information. This can be done by your local TSR or your resource in the ACAT for those distributors in the US. I have done this for you for this request, so you don't need to do anything. We should have the analysis back within a week at most.

Power management

Power management forum

TPS43000 thermal spec