• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 64 subscribers
  • Views 203 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90160: [Consultation] Sequencer: UCD90160RGCR

Paul Lei
Prodigy 170 points
Part Number: UCD90160

Hi TI service team,

This is Paul from ZT systems hardware team.

I need to know whether it exists interface for fusing firmware or not and also require pinout / specification of this interface.

Additionally, operation procedure is necessary, you could provide demonstrated board to let us adapt to the operation and GUI.

[Consultation]

  • Q1: Does this sequencer have dongle for firmware burning ? If it need a communication for connection between GUI and sequencer, please help provide pinout / the specification of header.
  • Q2: Does TI provide demonstrated board with this sequencer to let us familiarize with firmware operation system ? We need to acquaint with the operation procedure of your system for this sequencer.

Thank you very much.

Best Regards,

Paul Lei