BQ2201 /CEcon Pin held in current state when power removed?

Matt Guibord

Other Parts Discussed in Thread: BQ2201

It is stated in the BQ2201 datasheet that /CEcon is held in the current state if the power removed. Does TI have any parts that do not do this?

Thanks,
Matt Guibord

0 Garry Elder over 14 years ago

The bq2201 Power Down Timing Diagram shows that the CEcon pin will deactivate the SRAM CE pin upon power down. IS this what you need?

0 Matt Guibord over 14 years ago in reply to Garry Elder

Hi Garry,

Thanks for the help. It seems the customer was a little confused about the datasheet and it looks like this part will work.

Regards,
Matt Guibord

Power management forum