BQ40Z50-R1: BQ40Z50 T0 BQ40Z50-R1 FIRMWARE LOAD

sidda ganagaiah

Part Number: BQ40Z50-R1
Other Parts Discussed in Thread: BQSTUDIO

HI,

We have BQ40z50RSMT GASGAUGE IC we need to update BQ40Z50-R1 firmware how to do update R1 firmware.

regards,

sg.

0 Wyatt Keller over 3 years ago

Hello SG.

You can use the programming tab in BQStudio to select the SREC you would like to upload to the gauge.

Sincerely,

Wyatt Keller

0 sidda ganagaiah over 3 years ago in reply to Wyatt Keller

Hi Wyatt Keller,

ok thank you. where can i get the BQ40z50-R1 SREC file.

i did not find in TI web site.

regards,

sg.

0 sidda ganagaiah over 3 years ago in reply to Wyatt Keller

Hi Wyatt Keller,

ok thank you. where can i get the BQ40z50-R1 SREC file.

i did not find in TI web site.

regards,

sg.

0 sidda ganagaiah over 3 years ago in reply to sidda ganagaiah

Hi Wyatt Keller,

ok thank you. where can i get the BQ40z50-R1 SREC file.

i did not find in TI web site. please guide me.

regards,

sg.

0 Wyatt Keller over 3 years ago in reply to sidda ganagaiah

Hello SG,

It is on the product page under software development: https://www.ti.com/tool/BQ40Z50-DEVICE-FW

Sincerely,

Wyatt Keller

Power management forum