BQ40Z50: Chemid burning after low temperature learning

guoqing shi

Part Number: BQ40Z50
Other Parts Discussed in Thread: GPCRB, BQSTUDIO, EV2400

Hi，

In the process of low-temperature learning, GPC returned my GG_ Out, chemid file. When I burn the chemid file, bqstdio will flash back，Chemid burning failed。My chemid library has been updated to the latest

over 3 years ago

0 Wyatt Keller over 3 years ago

TI__Guru** 105770 points

Hello,

Please share screenshots of all the errors you see in BQStudio along with the GPCRB report and data submitted.

Sincerely,

Wyatt Keller

0 guoqing shi over 3 years ago in reply to Wyatt Keller

Intellectual 355 points

GS2040IM-upload-report.zipAs shown in the figure, after clicking the button in the red box, select the chemical file in the report, and then a progress bar will appear, followed by a flash back. Normally, a prompt of successful compilation should appear. The burned chemical file is as above

0 Wyatt Keller over 3 years ago in reply to guoqing shi

TI__Guru** 105770 points

Hello,

I tried uploading your chemdat file to one of our gauges and I did not see any errors, it programmed successfully. Please try updating your BQStudio to the test version which has the most bug fixes and features available.

Also update your EV2400 firmware as well.

Sincerely,

Wyatt Keller

0 guoqing shi over 3 years ago in reply to Wyatt Keller

Intellectual 355 points

How to apply for permission of test version

+1 guoqing shi over 3 years ago in reply to Wyatt Keller

Intellectual 355 points

I applied to download the latest version on the official website but was rejected

+1 Wyatt Keller over 3 years ago in reply to guoqing shi

TI__Guru** 105770 points

Hello,

It should not reject your request unless you are in a country we cannot export to.

This is what you tried downloading?

https://dr-download.ti.com/secure/software-development/application-software-framework/MD-bRM8jpqzOo/1.3.111.1/BatteryManagementStudio-1.3.111_Build1-windows-installer.exe

Sincerely,

Wyatt Keller

0 guoqing shi over 3 years ago in reply to Wyatt Keller

Intellectual 355 points

hello，

yes

0 Wyatt Keller over 3 years ago in reply to guoqing shi

TI__Guru** 105770 points

Hello,

Please share the message you receive which denies access.

I cannot do anything about the export controls.

Sincerely,

Wyatt Keller

0 guoqing shi over 3 years ago in reply to Wyatt Keller

Intellectual 355 points

I have got the access of the lasted version BQstdio ，and the problem had been solved ，thanks！

Power management

Power management forum

BQ40Z50: Chemid burning after low temperature learning