Hi Expert,
I see below sentence in datasheet, but from my understanding the EN should be high to enter Standby Delay. Is it wrong in the datasheet? Thanks.
BR,
Elec Cheng
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
I see below sentence in datasheet, but from my understanding the EN should be high to enter Standby Delay. Is it wrong in the datasheet? Thanks.
BR,
Elec Cheng
Hi Elec,
Please reference Figure 42:
The standby delay state is entered when EN and DIAG_EN go low. After tSTBY passes, then the device transitions to the Standby state. If EN is high, the device is in some form of active state.
Thanks,
Shreyas