• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 65 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UC2825: Protection diodes with UC2825

Andrew Massey
Prodigy 120 points
Part Number: UC2825
Other Parts Discussed in Thread: UCC2818

Hi,

We are doing PFC with UC2818D.We have the following diodes to protect the pins....(anode to GND, cathode to pin)

PKLMT pin  has a BAV102 CONNECTED (BAV102,  0.25A, 150V, Switching diode)

MOUT  pin  has SD0805S020S1R0  (Schottky, 20V, 1A) 

Gate drive pin  has CGRKM4005-HF  (600V, 1A , General purpose).

Do you think these diodes will be OK for the purpose?

  • 0
    TI__Genius 10805 points

    Hi Andrew, I just noticed that the product you tagged was the UC2825 but in the post you are referring to the UC2818D PFC (which I assume is the UCC2818D). Because of this, this post was mis-routed. I want to apologize for the delay and that I've assigned this to a product expert who will answer your question. 

  • 0 in reply to Ray DiCecco
    TI__Mastermind 24365 points

    Hi Andrew 

    Thank you for the query on ucc2818.

    The diode on multiplier should be ok although 20V 500mA schottky diode could be used.

    For the gate driver, I think 600v diode is not required. You could use a simple 40V 1A schottky diode. Similar diode could be used for pklmt pin, but your choice should work for this.

    Please let us know if you have any questions.

    Regards 

    Harish