After all parameters are set, the meter needs to do dataflash checksum reading and verification. bq20z75-V160 this type of read check the specific operation is what?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
After all parameters are set, the meter needs to do dataflash checksum reading and verification. bq20z75-V160 this type of read check the specific operation is what?
Hi,
It is to send a MAC command 0x0004 to calculate and verify the data flash, it is purposed the assure the integrity of data flash after data configuration is done