24V to 400V DC-DC Converter, 1.5KW

santhibhushan A

Prodigy 100 points

Other Parts Discussed in Thread: UCC28951

Please suggest us any reference design of DC-DC converter to get output of 400V, 1.5KW.

Input voltage :24VDC

over 2 years ago

0 Hong Huang over 2 years ago

TI__Guru 72965 points

Hi,

No existing reference design but it is likely ucc28951 can be used for your design. C2000 is another option.

You may contact your local TI office to see if a reference design can be made to your application specs.

0 santhibhushan A over 2 years ago in reply to Hong Huang

Prodigy 100 points

We would like to buy complete working module or PCB of TIDA-00951 from TI. Is it possible? If so, How much can I spent to purchase that?

0 Hong Huang over 2 years ago in reply to santhibhushan A

TI__Guru 72965 points

Hi,

Your mentioned TIDA - 00951 is based on C2000. Please create a new thread with key word C2000 and TMS320 on E2E. That thread will reach the proper team to answer your questions such as if ok to get the physical board of this design and how, etc.

I am with different support team so cannot support your C2000 request.

Power management

Power management forum

24V to 400V DC-DC Converter, 1.5KW