• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 217 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS24711: OCP Function

Renan Santos Adriano
Mastermind 22230 points
Part Number: TPS24711

Hello Team,

Posting on hebalf of my customer:

when in circuit breaker mode, what will the IC do if the current goes below the OCP threshold? Will it pull the gate to GND or it just ignores the OCP?

Thanks in advance.

Kind Regards,

Renan Adriano
Texas Instruments | Customer Support

  • 0
    TI__Mastermind 39000 points

    Hi Renan,

    If the load current comes down below the circuit breaker threshold before the timer expires (the voltage across CT reaches 1.35 V), the controller will not turn off.

    Please click on "This resolved my issue" if this post answers your query.