Power management

Power management forum

State TI Thinks Resolved
Locked Locked
Replies 6 replies
Answers 2 answers
Subscribers 63 subscribers
Views 277 views
Users 0 members are here

Support feedback

Options

Options

Related

LM74500-Q1: Tina-TI Simulation Model

LM

Prodigy 215 points

Part Number: LM74500-Q1
Other Parts Discussed in Thread: TINA-TI

Hello,

Could you please provide the Tina-TI spice model for this component LM74500-Q1?

Kind regards,

LM

over 2 years ago

0 Praveen GD over 2 years ago

TI__Guru 57737 points

Hi LM,

Thanks for reaching out. Let me get back to you by tomorrow.

0 Praveen GD over 2 years ago in reply to Praveen GD

TI__Guru 57737 points

Hi LM,

Please find LM74500-Q1 TINA_TI Model attached.

LM74500-Q1_TRANS.TSM

0 LM over 2 years ago in reply to Praveen GD

Prodigy 215 points

Thanks a lot!

0 LM over 2 years ago in reply to Praveen GD

Prodigy 215 points

Can I run a DC analysis with this model?

It seems to have a convergence issue. It can't find the operating point.

0 Praveen GD over 2 years ago in reply to LM

TI__Guru 57737 points

Hi LM,

The model we have shared can be used only for Transient simulations. You can apply a DC voltage at input and measure the voltages at each node in the waveform results.

0 LM over 2 years ago in reply to Praveen GD

Prodigy 215 points

Alright, thanks