• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 221 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ24292I: Clarification on Vregn for BQ24292

BQ24292I: REGN LDO

Danilo A.
Mastermind 28590 points
Part Number: BQ24292I

Hi Team,

The E2E thread below shows a screenshot of electrical specs of the BQ24292I REGN LDO where in the typical output voltage is 5V. It is also stated that the REGN LDO is basically a 5V LDO. 

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1069980/bq24292i-clarification-on-vregn-for-bq24292?tisearch=e2e-sitesearch&keymatch=BQ24292%20LDO#

However, the attached datasheet shows that the typical output voltage is 6V. Why is that so?

https://www.ti.com/lit/ds/symlink/bq24292i.pdf#page=8

Our customer would like to know what would be the output voltage of the REGN LDO if the VBUS is 15V.

Regards,

Danilo