TPS16630-32EVM: please help to check the design

fu zhifang

Part Number: TPS16630-32EVM

dear supplier ,

I am trying to use the TPS16630RGER in our product , please help to check the design if there is any mistake or problem , if you have any question please let me know. I am looking forward to your reply, thank you very much !

TPS2663x _TPS1663x_Design_Calculator_revB_20230329.xlsx

over 2 years ago

0 Kunal Goel over 2 years ago

TI__Guru* 79181 points

Hi Fu,

It looks fine.

Regards

Kunal Goel

0 fu zhifang over 2 years ago in reply to Kunal Goel

Prodigy 50 points

thank you very much!

0 zhu.yumao over 2 years ago in reply to Kunal Goel

Prodigy 40 points

Hi Kunal，

About the COUT, The value we filled in the table is 220uF. I have tried to change this value to 1uf, and there are no errors in the table.

What determines the value of COUT? We want to cost down as much as possible.

thanks~

0 Kunal Goel over 2 years ago in reply to zhu.yumao

TI__Guru* 79181 points

Hi Fu,

Cout depends on the application needs. eFuse is not dependent on COUT for its function. You can choose COUT based on your needs.

Regards

Kunal Goel

Power management

Power management forum

TPS16630-32EVM: please help to check the design