• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 358 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How I check the I2C port of EV2300

Carlos Urbano
Prodigy 30 points
Other Parts Discussed in Thread: BQ27500

Hello,

i made a bq27500evm for final university project but it is impossible initialice the bq27500 and I don´t know if is correct the I2C was used in the ev2300 ¿how I can tested this port? ¿exits any SW aplication to check the corrects protocol of this device?

Many thanks in advantage.

 

  • 0
    TI__Genius 14985 points

    Carlos,

    If you have a bq27500EVM you can test the EV2300 with the EVM.

    However, I suspect it is a driver issue or a design issue.  Let's combine this post with your other one and debug this here:

    http://e2e.ti.com/support/power_management/battery_management/f/180/p/121412/432611.aspx#432611